English
R & D
In recent years, with the continuous development of petrochemical and shale gas, new energy is also in coutinuous development. The market demand and development of hydrogen energy is also increasing, posing many challenges to our transportation and development processes. As an indispensable component in transportation and driving equipment, sealing components play an important role in ensuring the...
FKM – Fluoroelastomers FKM is a fluorocarbon rubber, commonly referred to as fluorine rubber, VITON and FPM. They provide additional heat and chemical resistance. FFKMs are perfluororelastomer compounds containing an even higher amount of fluorine than FKM fluoroelastomers. They have improved resistance to high temperatures and chemicals and even withstand environments where Oxygen-Plasma are pres...
Grooves and Glands The physical space occupied by the seal is usually referred to as a groove, but it can also be referred to as a gland. In most cases, it’s a rectangular groove cut into the hardware whether it be on a piston, in the housing for a rod, or in the face of two mating surfaces. Compared to O Ring and elastomer seals, PTFE and polymer seals are critically dependent on hardware conditi...
Lockdown Screw packing seal is usually made of an HBNR compression packing element with molded metal end caps. But JST has developed a lockdown screw packing seal which is made of one filled PTFE and two cooper end caps. It is the sealing between wellhead members in a wellhead, including a seal element and a lockdown member. The seal is attachable to either one of the wellhead members by coup...
Spring Energized Seals are made up of two components: a polymer-based seal jacket and spring energizer. Spring energized seals are great for use in environments that are too aggressive for other types of seals, as they provide a longer service life, maintain sealing pressure, and offer extreme wear resistance. Spring Energized Seals are popular in the medical device industry for a variety of reaso...
Industrial grade FFKM seal FFKM has excellent chemical corrosion resistance and high temperature resistance characteristics, which makes FFKM widely used in various harsh working conditions for chemical applications. Semiconductor grade FFKM seal JST semiconductor-grade FFKM compounds are with high purity (low amount of extractables) and very good oxygen and CF4 plasma resistance, which have the t...
In the seals manufacturing process, it is essential to ensure the accuracy of dimensions. Only the correct size can ensure that the seals fit well with the equipment and avoid leakages and failures. Therefore, dimensional measurement becomes an essential job. Preparation before measurement Before you start measuring, you need to do some preparatory work. First, clean the surface of seal to remove ...
The temperatures involved with LNG happens to be at the point where many elastomers and polymer materials lose elasticity and begin to behave as brittle materials. Some seals may also experience dimensional fluctuations related to temperature changes, further increasing the likelihood of failure. If temperature fluctuations are periodic, problems related to cyclic stress will arise. Another issue ...
JST new design of Lockdown screw packing is made from one PTFE ring and two copper rings. PTFE ring is able to lower the holding force and friction, thus lower the torque. Meanwhile, two copper rings can better protect the LDS body not to be damaged during the twisting and rotating process. JST has conducted the test to qualify the PR2 performance of 1.51 inch LDS packing seal at L-X -46℃~177℃ ( -...
New Blog
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
No. 1, Xinyu North Road, Ningxi Street, Zengcheng District, Guangzhou, China 511340
© Copyright: 2024 Guangzhou JST Seals Technology Co., Ltd. All Rights Reserved.
Scan to wechat
