English
KZT is used in combination with anti-wear and piston ring to prevent cylinder oil from mixing with foreign particles, avoiding seal damage.
Brand:
JST SealsItem NO.:
KZTPayment:
T/TProduct Origin:
ChinaShipping Port:
GuangzhouOrder(MOQ):
50Hydraulic cylinder PTFE seal KZT
KZT hydraulic cylinder wipers are used in combination with anti-wear and piston ring to prevent cylinder oil from mixing with foreign particles, avoiding seal damage.
There are always dust or sand particles in the place where the hydraulic cylinder is used. These dust and sand particles will be brought into the cylinder when they are bonded with the oil film on the surface of the piston rod, which will scratch the lip of the lip seal ring on the piston rod or the surface of the piston rod, which will cause medium leakage. Therefore, it is necessary to set a dust ring outside the piston rod sealing ring near the end face of the cylinder barrel.
The dust ring is installed in the groove. Because there is a certain amount of interference between the lip of the dust ring and the piston rod, the lip of the dust ring is close to the surface of the piston rod.
When the piston rod moves back and forth, the dust and sand adhered to the surface of the piston rod are removed by the dust ring. There is a certain clearance between the right section of the dust ring lip and the piston rod, which can reduce the friction resistance between the dust ring lip and the piston rod.
JST uses PTFE dust seals, making full use of the characteristics of sealing materials to give full play to the best performance of the seals. This kind of seal has good sealing effect, long service life and increasingly wide application.
 |
Advantages:
1. Low cost
|
|
Working Conditions |
||||
|
Working Pressure |
Working Temperature |
Working Speed |
Working Medium |
Material |
|
≤40Mpa |
-100℃ to +200℃
|
≤4m/s |
Mineral oil, Gas, Water |
Bronze filled PTFE
|
Application Suggestion:
Dust Seal is used for excavator,bulldozer,loader,road grader,Forklift truck,etc.
Size:
 |
||
| PN. | Size | Material |
| KZT | 80X72X4 | PTFE+Bronze |
| KZT | 80X72X6.1 | PTFE+Bronze |
| KZT | 80X74X4 | PTFE+Bronze |
| KZT | 85X77X4 | PTFE+Bronze |
| KZT | 85X77X6.1 | PTFE+Bronze |
| KZT | 85X77X9.7 | PTFE+Bronze |
| KZT | 85X79X4 | PTFE+Bronze |
| KZT | 90X82X4 | PTFE+Bronze |
| KZT | 90X82X6.1 | PTFE+Bronze |
| KZT | 90X82X9.7 | PTFE+Bronze |
| KZT | 90X84X4 | PTFE+Bronze |
| KZT | 95X87X6.1 | PTFE+Bronze |
| KZT | 95X87X4 | PTFE+Bronze |
| KZT | 95X87X9.7 | PTFE+Bronze |
| KZT | 95X88X7.9 | PTFE+Bronze |
| KZT | 95X89X4 | PTFE+Bronze |
| KZT | 100X92X4 | PTFE+Bronze |
| KZT | 100X92X6.1 | PTFE+Bronze |
| KZT | 100X92X8.1 | PTFE+Bronze |
| KZT | 100X92X9.7 | PTFE+Bronze |
| KZT | 100X94X4 | PTFE+Bronze |
| KZT | 105X97X8.1 | PTFE+Bronze |
| KZT | 105X97X4 | PTFE+Bronze |
| KZT | 105X97X6.1 | PTFE+Bronze |
| KZT | 105X99X4 | PTFE+Bronze |
| KZT | 110X102X6.1 | PTFE+Bronze |
| KZT | 110X102X7.9 | PTFE+Bronze |
| KZT | 110X104X4 | PTFE+Bronze |
| KZT | 115X107X6 | PTFE+Bronze |
| KZT | 115X107X7.9 | PTFE+Bronze |
| KZT | 115X107X9.7 | PTFE+Bronze |
| KZT | 115X109X4 | PTFE+Bronze |
| KZT | 120X112X8 | PTFE+Bronze |
| KZT | 120X112X9.6 | PTFE+Bronze |
| KZT | 120X112X6.1 | PTFE+Bronze |
| KZT | 120X114X4 | PTFE+Bronze |
| KZT | 125X117X8 | PTFE+Bronze |
| KZT | 125X117X6.1 | PTFE+Bronze |
| KZT | 125X117X9.7 | PTFE+Bronze |
| KZT | 130X122X8 | PTFE+Bronze |
| KZT | 130X122X6.1 | PTFE+Bronze |
| KZT | 130X122X9.7 | PTFE+Bronze |
| KZT | 135X127X8 | PTFE+Bronze |
| KZT | 135X127X6.1 | PTFE+Bronze |
| KZT | 135X127X9.7 | PTFE+Bronze |
| KZT | 140X132X8 | PTFE+Bronze |
| KZT | 140X132X6.1 | PTFE+Bronze |
| KZT | 140X132X9.7 | PTFE+Bronze |
| KZT | 145X137X6.1 | PTFE+Bronze |
| KZT | 145X137X7.9 | PTFE+Bronze |
| KZT | 145X137X9.7 | PTFE+Bronze |
| KZT | 150X142X8 | PTFE+Bronze |
| KZT | 150X142X6.1 | PTFE+Bronze |
| KZT | 150X142X9.7 | PTFE+Bronze |
| KZT | 160X152X6.1 | PTFE+Bronze |
| KZT | 160X152X7.9 | PTFE+Bronze |
| KZT | 160X152X9.7 | PTFE+Bronze |
| KZT | 165X157X6.1 | PTFE+Bronze |
| KZT | 165X157X7.9 | PTFE+Bronze |
| KZT | 165X157X9.7 | PTFE+Bronze |
| KZT | 170X162X7.9 | PTFE+Bronze |
| KZT | 170X152X9 | PTFE+Bronze |
| KZT | 170X162X9.7 | PTFE+Bronze |
| KZT | 170X162X6.1 | PTFE+Bronze |
| KZT | 175X167X6.1 | PTFE+Bronze |
| KZT | 175X167X9.7 | PTFE+Bronze |
| KZT | 180X172X7.9 | PTFE+Bronze |
| KZT | 180X172X9.7 | PTFE+Bronze |
| KZT | 185X177X9.7 | PTFE+Bronze |
| KZT | 190X182X7.9 | PTFE+Bronze |
| KZT | 190X182X9.7 | PTFE+Bronze |
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
DLI is a dust resistance and oil-scraping double acting seal. Consist of PU and iron material.
Wipers are installed in the sealing configurations of hydraulic cylinders to prevent contaminants such as dirt, dust and moisture from entering the cylinder as they retract back into the system.
Wipers are installed in the sealing configurations of hydraulic cylinders to prevent contaminants such as dirt, dust and moisture from entering the cylinder as they retract back into the system.
DKBI wipers are installed in the sealing configurations of hydraulic cylinders to prevent contaminants such as dirt, dust and moisture from entering the cylinder as they retract back into the system.
Lockdown screw seal is used mainly in geothermal applications, HNBR packing with stainless steel caps provide superior performance over metal pressure seals.
The FDR seal is made of a helical wound spring and a polymer jacket, which is mainly used as a Flange external face seal.
In LNG operations, valves can regularly encounter temperatures below -320 F (-196 C) and pressures above 750 pounds per square inch (psi). They are also subjected to periodic variations in temperatures known as “thermal cycling,” which can result in hardware expansion as well as shrinkage and material stresses. These factors make reliable, long-term valve operation an engineering challenge.
T-seals are three piece seals with an elastomeric lip and hard plastic anti-extrusion rings, it is proved to be of long time service. The standard design will fit into an o-ring gland and can be machined or net moulded.
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
No. 1, Xinyu North Road, Ningxi Street, Zengcheng District, Guangzhou, China 511340
© Copyright: 2024 Guangzhou JST Seals Technology Co., Ltd. All Rights Reserved.
Scan to wechat
