English
Cryogenic Sealing Solutions provides a powerful sealing mechanism for cryogenic materials such as cryogenic fluids. Sealing at cryogenic temperatures has its own unique set of challenges. JST Seals recently designed and shipped a very urgent LNG cryogenic valve seals for the overseas customer. Its completed working conditions are as follows: Fluid media LNG at temperature: minus 175°C Maximum temp...
The number of reliable sealing solutions for Low-Temperature Service in LNG plants is limited. The two main polymers currently used are PTFE spring energized seal or UHMW-PE seals. The challenge of using liquefied natural gas The leakage of LNG (liquefied natural gas) at low temperature is dangerous to the health and safety of workers and the operation of the plant. The problems such as toxicity, ...
Spring energized seal is a spring-actuated, pressure-assisted sealing device consisting of a PTFE (or other polymer) jacket partially encapsulates a corrosion-resistant metal spring energizer. When the JST seal is installed in the gland, the spring is under compression, forcing the jacket lips against the gland walls and there by creating a leak-tight seal. The spring provides permanent resilience...
When designing a cryogenic seal, the first step is to determine the operating temperature range of the seal. Typically, cryogenic seals operate below -65 degrees Fahrenheit. When designing seals of this level (high temperatures are around 300 degrees Fahrenheit), it is necessary to understand what degree of leakage control is required on the low temp end. However, there may be an allowable leakage...
Sealing at cryogenic temperatures has its own unique set of challenges. To provide superior protection against leakage in cryogenic valves for LNG, cryogenic seals should be designed with the following properties in mind: Jacket material that tolerates thermal cycling A spring energizer to compensate for shrinkage Anti-extrusion lip geometry JST has a wide range of solutions for cryogenic sealing ...
Sealing for API 6D ball valve and LNG at cryogenic temperatures has its own unique set of challenges. JST has a wide range of solutions for cryogenic sealing applications. The range includes valve stem seals and valve seat seals. Compounds and designs could vary as per specific applications. The material mainly includes polymer jacket (virgin PTFE, filled PTFE, TFM, PCTFE, UHMW-PE, PEEK, etc.) and...
New Blog
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
No. 1, Xinyu North Road, Ningxi Street, Zengcheng District, Guangzhou, China 511340
© Copyright: 2025 Guangzhou JST Seals Technology Co., Ltd. All Rights Reserved.
Scan to wechat
