• August 27. 2021

Wellhead is a critical part of the oil and gas infrastructure. Seals material and design must withstand pressures as high as 15K psi and temperatures LU (-46℃~121℃), PU (-21℃~121℃), or SX (-18℃~178℃). From material development, seals design, testing, through to production, JST make FS seal and S seal to perform in the toughest situations, delivering reliable high pressure sealing. They combine the...

• October 14. 2021

In the oil and gas industry, the risk and consequence of unplanned downtime is greatest in extreme environments. JST has long been committed to the provision of sealing solutions for the exploration and production of oil and gas. Wellhead is a critical part of oil and gas infrastructure. Its sealing materials need to withstand pressures as high as 15 000 psi and temperatures of 149º C. From d...

• December 14. 2021

For wellhead casing head, tubing hanger, JST provides elastomer seals including FS seal, S seal, P seal, O ring, MEC metal end-cap seal and lock screw packing. These seals are essential elements in the integrity and functionality of wellhead equipment. We developed HNBR, FKM, AFLAS and other material accordingly which have high pressure resistance, good sealing characteristics. 1. Materials tested...

• February 10. 2022

There are two sets of sealing rings (secondary sealing of oil casting head) at the bottom of conventional oil pipe head and casting head, which are used to seal the castings suspended at the top. At present, the commonly used seals are FS seal, S seal and P seal. The design of S and FS wellhead seals requires that they can withstand higher and higher pressure and temperature, and meet more stringe...

• March 03. 2022

JST Seals produces various sizes of FS seal and P seal, from 4.5" to 36". FS seal: FS seal is suitable for 15000Psi, LU temperature rating, chemicals with H2S/CO2. Below drawings show our standard FS seal groove dimension and product drawing. 26” FS seal 30” FS seal P seal: Regarding P seal, JST has two different designs. One design is rubber reinforced with two 316ss wire mesh back up rings, anot...

• June 09. 2022

FS casing and tubing seals are uniquely designed sealing elements that provide excellent sealing in areas where high seal deflection is required. The design features of this seal allow the component to compensate for changes in piping, housing, or large diameter parts. The use of metal clamping springs provides extrusion resistance. The open coil has no initial tension during manufacturing, so the...

• July 25. 2022

JST compound H3385 is a hydrogenated acrylonitrile-butadiene-rubber commonly referred to as HNBR or HSN, with excellent physical characteristics, outstanding abrasion resistance and chemical resistance to common hydraulic fluids, sour oils/gases(H2S) and crude oils. H3385 has been optimized to withstand the risk of rapid gas decompression(RGD) or explosive decompression(ED)or anti-explosive decomp...

• January 04. 2024

Oil well production is the most important stage in the lifespan of oil wells, which prepares oil or natural gas for final treatment by releasing hydrocarbons. Separation is usually carried out on the seabed, rather than on the platform of offshore oil wells. In addition to dealing with system pressures up to 1,380 bar (20,000 PSI) and temperatures exceeding 900C(1,650F) in flare stack controls, se...