Spring energized ball valve seal

Bidirectional high-pressure ball valve seat seal is a type of seat sealing that can withstand bidirectional pressure, with good low-temperature performance and airtightness, and is widely used in 6D ball valves.

JST FHP series is  made of a helical wound spring and a polymer jacket, which is mainly used for piston.

The BVR series is made of a canted level spring and a polymer jacket, which is mainly used as a seat seal.

The FHB seal is made of a helical wound spring and a polymer jacket, which is mainly used as a Flange internal face seal.

V Packing consist of multiple male and female adaptor, usually a group of three to seven v rings, used for low or high pressure applications with Single or Double acting cylinder.

FFKM O-rings provide the highest temperature (up to 620 ° F) and most common chemical resistance among all rubber O-ring and gasket materials.

Wipers are installed in the sealing configurations of hydraulic cylinders to prevent contaminants such as dirt, dust and moisture from entering the cylinder as they retract back into the system.

V-Packings are used in various Oilfield Downhole equipment such as various Valves etc. V-Packings are extremely suitable for usage in medium to heavy duty applications. Vee Packings accept low and high pressure while operating in the most extreme conditions and also if there exists any misalignment between the sealing gaps.