• October 22. 2021

The back up ring, also called anti extrusion ring, is aptly named as they do just that: they back-up an O-ring. The purpose of using the backup ring is to prevent the O-ring from extruding into the sealing gap under the system pressure. The structure of the increased back up ring will bear much higher pressure than using the O-ring alone. The profile shape of the back up ring is usually rectangula...

• March 03. 2022

JST Seals produces various sizes of FS seal and P seal, from 4.5" to 36". FS seal: FS seal is suitable for 15000Psi, LU temperature rating, chemicals with H2S/CO2. Below drawings show our standard FS seal groove dimension and product drawing. 26” FS seal 30” FS seal P seal: Regarding P seal, JST has two different designs. One design is rubber reinforced with two 316ss wire mesh back up rings, anot...

• April 13. 2022

JST makes custom and standard PEEK back-up rings. Custom sizes up to 24” outer diameter. PEEK™ back-up rings are designed to prevent extrusion in elastomer O-ring sealing systems. Elastomer O-rings serve as effective seals for dynamic and static applications in hydraulic and pneumatic equipment systems. A drawback of elastomer O-rings is their tendency to extrude into the clearance of ma...

• June 10. 2022

JST produces different material spring energized lip seal. Jacket material such as PTFE, PEEK, TFM. Spring material include 316ss or Alloy spring. For different working conditions, we use different seal designs and materials. If seal works at pressure over 6000PSi, PEEK back up ring is needed. For -196°C, we would use material TFM+Alloy spring. JST has ability to produce different dimensions of sp...