R & D
With the development of industry, the requirements for sealing rings are increasing. Various new sealing rings have replaced some traditional ones. Among them, the spring PTFE sealing ring is widely used because of its good sealing effect and normal operation under certain adverse conditions. The spring PTFE sealing ring is composed of the spring covered with polytetrafluoroethylene. As shown in F...
Lip seal, also known as spring energized ring, is widely used in various fields because of its excellent sealing performance. In the production of valves under special working conditions, rubber O-rings cannot meet the requirements, so other sealing schemes shall be selected instead. The advantage of lip seal is that it can realize "self sealing" like an O-ring, that is, its sealing performance in...
Vee packing is used for downhole equipment in oil field. JST provides chevron and HNBR Vee packing. The Vee packing group is composed of a top ring, a bottom ring and several intermediate center rings. V-Packings is ideal for medium and heavy duty applications. V-packing can withstand low pressure and high pressure when working under the most extreme conditions. JST standard Vee Packings materials...
1. Tensile property of valve stem sealing material Tensile property is the first property to be considered for sealing materials, including tensile strength, constant tensile stress, elongation at break and permanent deformation at break. The tensile strength is the maximum stress at which the specimen is stretched to fracture. The constant elongation stress (constant elongation modulus) is the st...
S Seals is made from elastomer and two metal garter spring. The metal garter spring is incorporated into the elastomeric seal element. The one-piece S seal eliminates the installation issues that may occur when using multi-component seals. It can be stretched into place without splitting or damaging the non-extrusion components. S seal can be manufactured to accommodate almost any gland size, incl...
The high-performance metal spring energized seal is made of high-performance polymer, which can solve the sealing challenges of rotating motion, friction resistance limitation, plane change along the sealing surface and dynamic sealing. PTFE spring energized seals are designed for extreme low temperatures ranging from -270 ° C to extremely high temperatures, sometimes exceeding 300 ° C. The specif...
Trimming of rubber seals is an essential process in the production of rubber products. The quality of trimming process directly affects the production efficiency and quality of rubber seals. Common trimming methods of rubber sealing ring are as follows: 1. Manual trimming. Manual trimming is the most traditional trimming method, which trims the excess glue edge step by step along the outer edge of...
The processing technology of turning seals is different from that of traditional molded seals. The raw materials for turning hydraulic seals are blank barrels formed by high-pressure extrusion of raw materials after heating and melting, and then the hydraulic seals are turned by special turning CNC seal processing equipment that programs various seal data through software. Turning hydraulic seals ...
PTFE seal is the core of hydraulic equipment and the guarantee for normal operation of hydraulic equipment. Therefore, the installation of PTFE seals is very important. Any error in the installation process may affect the sealing performance, and then affect the normal operation of hydraulic equipment. Therefore, it is necessary for operators to understand the installation precautions of PTFE seal...
New Blog
© Copyright: 2024 Guangzhou JST Seals Technology Co., Ltd. All Rights Reserved.
IPv6 network supported
Scan to wechat