English
The water
pump seal D1 is composed of one or couple of fabric reinforced Chevron V rings
(DM), back up ring (DD) and header ring (DS) for plunger sealing.
Brand:
JST SealsItem NO.:
D1Payment:
T/TProduct Origin:
ChinaShipping Port:
GuangzhouOrder(MOQ):
50High pressure water pump plunger seal
The water pump seal D1 is composed of one or couple of fabric reinforced Chevron V rings (DM), back up ring (DD) and header ring (DS) for plunger sealing. The back up ring and the header ring may be fabricated from metal.
Due to the advantages of the shape, the V rings can produce uniform pre tightening force, so it has good sealing performance under low friction and low pressure; Under the action of the system pressure, the V rings will form a pressing force on the sealing surface to ensure that the water seal does not slide in the groove. At the same time, the height of the seal and the depth of the groove design will ensure to avoid axial movement.
D1 has successful experience in applying to high-pressure pumps. It is mainly applied to single acting pistons with self weight return, and can also be used on double acting pressure cylinders.
|
|
Installation: Due to the low elastic force of the cloth clamp, it is recommended to design the groove as an open type for easy installation. When installing the seal, sharp edges should be avoided from scratching the lip of the seal.
Compounds: Fabric reinforced V rings The support ring is sandwiched with rubber or Poly aldehyde resin |
|
Working Conditions |
||
|
Temperature range |
Pressure |
Surface speed |
|
-40℃ to 100℃ |
≤500bar |
≤0.5m/s |
Size:
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
The pump plunger sealing system is adopted in the pump, which can effectively prevent the damage caused by water leakage and prevent the pump failure caused by the plunger friction overheating.
O ring is a type of seals with solid rubber material or PTFE and an O-shaped cross section.
In LNG operations, valves can regularly encounter temperatures below -320 F (-196 C) and pressures above 750 pounds per square inch (psi). They are also subjected to periodic variations in temperatures known as “thermal cycling,” which can result in hardware expansion as well as shrinkage and material stresses. These factors make reliable, long-term valve operation an engineering challenge.
This product can fully meet the pressure working conditions of current hydrogen compressor transportation equipment, ranging from 0 to 90MPa, and the sealing element will not extrude and deform, with good sealing performance.
SPGO is a low friction piston seal consisting of PTFE+Bronze seal ring and rubber o-ring used for two-way piston seal of Hydraulic cylinder, to seal in fluid, thus preventing the flow of fluid across the piston, allowing pressure to build up on one side of the piston.
ptfe wear strips can keep the piston centered as well as preventing metal-to-metal contact.
The FDB seal is made of a helical wound spring and a polymer jacket, It is the best choice for vacuum, gas and low-temperature flange sealing applications.
Swivel joint ball plug is working together with hammer union seals, to seal the balls of high pressure elbows and grease.
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
No. 1, Xinyu North Road, Ningxi Street, Zengcheng District, Guangzhou, China 511340
© Copyright: 2025 Guangzhou JST Seals Technology Co., Ltd. All Rights Reserved.
Scan to wechat
