• July 16. 2021

JST's Spring Energized Seals, also called Lip Seals, are normally comprised of a machined polymer jacket and a spring energizer. They are available for rod, piston, and rotary applications, and can be manufactured in a variety of polymer materials depending on each application requirement. Our seals can be made of different PTFE materials, from Virgin PTFE or PTFE with fillers of di...

• November 12. 2021

JST manufactures a variety of P seals. The standard P Seal is a one-piece molded seal utilizing molded-in anti-extrusion device. This design enhances assembly by eliminating the loose anti-extrusion devices used in other designs. P seal can be used to seal rough casing and tubing. The standard material is HNBR85 to 90 durometer, and the material should be suitable for PU or LU temperature rat...

• March 22. 2022

Fracturing pump seals，also known as plunger pump packing or plunger packing seal, are mainly applied in fracturing trucks, mud pumps and cementing trucks for oil industry of harsh working conditions. The fracturing pump seals are combined with Top Adapter, Bottom Adapter and Pressure Rings. The number of the pressure rings is flexible, which allows the seal sealing at a wide range of pressures und...

• June 20. 2022

With the development of fracturing and acidizing application technology, fracturing pumps with high pressure and large flow are required. The working condition of fracturing pump is extremely bad: high pressure, high acidity, high sand content and high sand hardness. Poor working conditions make the service life of the plunger pump seals short and the maintenance frequent. Sometimes, the seals mad...

• September 15. 2022

Spring lip seals have been used for many years. Spring lip seals are used in a manner similar to conventional elastomer seals, such as o-rings. Elastomer seals often fail due to conditions that often occur in their operating environment, such as chemical corrosion, extreme high or low temperatures, extrusion, friction, or compression set. However, spring lip seals have different structures and do ...

• September 21. 2023

A water pump seal is a mechanical component that helps to contain the liquid inside a pump and prevent it from leaking. The seal is usually located between the pump's rotating shaft and the pump housing. The purpose of a water pump seal is to provide a barrier between the liquid being pumped and the environment outside the pump, thus preventing leaks and contamination of the liquid. There are seve...

• October 25. 2023

Whether it is on onshore oil wells, offshore drilling platforms, or subsea oil wells, it is necessary to avoid blowouts at all costs - or uncontrolled release of natural gas and/or crude oil from excavation sites. JST provides high-quality industrial rubber products for the oil field industry, such as rubber blowout preventer seals. With the help of the blowout preventer seal, the well can be safe...

• January 12. 2024

Choosing the right seal for your application is not easy. If you want a reliable and long-lasting performance, it’s crucial to consider the following operational conditions. Working Pressure: High pressure applications require higher durometer seals to resist extrusion. Working Temperature: Different elastomers have different low and high temperature capabilities. Installation Parameters...