English
R & D
A correct installation can prolong the life cycle of the seal ring. We have following suggestions when install the spring energized seal. Preparation before installation: 1. Check whether the surface finish of the groove meets the requirements; 2. Clean the sealing ring and groove surface with dust-free cotton cloth; 3. Check whether the installation chamfer is smooth and free of burrs. Installati...
JST produces elastomer seal, material includes HNBR, NBR, FKM, AFLAS. There are lots of factors affecting an elastomer seal's performance, such as the chemical reactivity of the elastomer seal , working temperature, working pressure and working medium will influence the sealing performance. To make sure seal with no leakage and suitable for high temperature, lower temperature, high pressure, H2S/C...
Spring energized seal, also called spring loaded seal can select V-shape, H-shape or C-shape spring forms and sealing lip design according to various applications such as dynamic and static or internal and external pressure, so as to produce different sealing force and compressible deformation (see the following figure: spring deformation / elastic curve). The spring force will affect the performa...
RGD is known as Rapid Gas Decompression, AED is known as Anti-Explosive Decompression. RGD (Rapid Gas Decompression) or AED (Anti-Explosive Decompression) is a failure mechanism of O-rings and elastomer seals which is caused by the rapid reduction in pressure of the gaseous medium. When the pressure is released, the gas penetrating into the elastomer seal will expand violently, which in turn will ...
PolyPak seal combines the O-ring as an energizer with the lip seal to form a special sealing device, which can seal in vacuum and high and low pressure applications. It is a multi-purpose seal. PolyPak advantages: PolyPak has obvious advantages over the traditional lip seal, because there is basically no lip load in the basic seal design, so it is easy to leak under low pressure. PolyPak is an ext...
Packer elements are rubber seals that operate under specific down-hole conditions and provide an elastomeric seal for either short-term or long-term completion. Packer elements are used between sections of oil and gas production tubing to prevent fluids and pressure from leaking through the joints. This protects the casing, production tubing, liner and wellbore wall above and below the producing z...
JST makes custom and standard PEEK back-up rings. Custom sizes up to 24” outer diameter. PEEK™ back-up rings are designed to prevent extrusion in elastomer O-ring sealing systems. Elastomer O-rings serve as effective seals for dynamic and static applications in hydraulic and pneumatic equipment systems. A drawback of elastomer O-rings is their tendency to extrude into the clearance of ma...
Guangzhou JST Seals produces ID face seal and OD face seal for FLS valve from size 1 13/16 to 7-1/16 inch and for pressure from 2000Psi to 20,000Psi. JST provides ID face seals and OD face seals with two different materials for FLS and FLS-R valves. A common option is virgin peek spring powered by a stainless-steel spring. Another option is glass moly filled PTFE with stainless steel springs, whic...
S Seals are well suited for sealing wellheads, connectors, downhole tools, high pressure valves and other demanding oil and gas applications. The non-extrusion springs can be fabricated from different metals. Product Highlights Alternative engineered seal design to using T Seals or O-Rings, traditional S Seals utilize metal spring for supporting sealing of various extrusion gaps. Designed as...
New Blog
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
No. 1, Xinyu North Road, Ningxi Street, Zengcheng District, Guangzhou, China 511340
© Copyright: 2025 Guangzhou JST Seals Technology Co., Ltd. All Rights Reserved.
Scan to wechat
